ECM REMOVAL

PROCEDURE


  1. PERFORM REGISTRATION

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE NO. 1 ENGINE COVER

    Click here

  5. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  9. DISCONNECT NO. 1 AIR CLEANER INLET


    1. A002PCF

      Remove the bolt and disconnect the No. 1 air cleaner inlet.

      Note

      Slide the No. 1 air cleaner inlet to ensure a space for the removal and installation of the ECM installation bolt.

  10. REMOVE ECM


    1. A002NIQ

      Push in the locks on the 2 levers, raise the levers and disconnect the 2 ECM connectors.

      Text in Illustration
      A002OPC Push

      Note

      After disconnecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.

    2. A002MV6

      Remove the 2 bolts and ECM with bracket.

    3. A002O87

      Remove the 2 screws and No. 1 ECM bracket.

    4. Remove the 2 screws and No. 2 ECM bracket.