HEATED OXYGEN SENSOR INSTALLATION

PROCEDURE


  1. INSTALL HEATED OXYGEN SENSOR


    1. A002OYOE05
      *1 Fulcrum Length

      Using SST, install the heated oxygen sensor to the front exhaust pipe.

      SST
      09224-00011
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note

      Do not damage the sensor.

    2. A002POJ

      Install the wire harness clamp bracket.

    3. Attach the clamp.

    4. Connect the sensor connector.