ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine oil temperature sensor.

   2. Using a 19 mm deep socket wrench, install the engine oil temperature sensor to the timing chain cover sub-assembly.

      Torque:

      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

   3. Connect the engine oil temperature sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

   Click here

3. REMOVE REAR ENGINE UNDER COVER RH

   Click here

4. INSTALL FRONT WHEEL RH

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }