KNOCK SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repairs" after replacing the knock sensor Click here.

PROCEDURE


  1. INSTALL KNOCK SENSOR


    1. A002OCCE02
      *1 Top

      Install the knock sensor with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock sensor is in the correct position.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the knock sensor Click here.

    2. A002PV0

      Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD


    1. Install the intake manifold Click here.