ACCELERATOR PEDAL INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATOR PEDAL ROD

    Note


    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal rod.

      If applied, the accelerator pedal rod must be replaced.

    • Avoid physical shocks to the accelerator pedal rod.

    • Do not disassemble the accelerator pedal rod.


    1. A002NULE02
      *1 for LHD:
      *2 for RHD:

      Install the accelerator pedal rod with the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal position sensor connector.