REAR COIL SPRING INSTALLATION

PROCEDURE


  1. INSTALL REAR COIL SPRING UPPER INSULATOR LH


    1. A002MY4E02
      *1 10 mm or less

      Install the rear coil spring upper insulator to the rear coil spring.

      Note

      Install the rear coil spring upper insulator so that the distance between the stopper and the upper end of the rear coil spring is 10 mm (0.393 in.) or less.

  2. INSTALL REAR COIL SPRING LOWER INSULATOR LH

  3. INSTALL REAR COIL SPRING LH


    1. A002OS4E01
      *1 Identification Mark
      *2 30° or less

      Install the rear coil spring to the rear axle beam.

      Note

      Install the rear coil spring so that the identification marks are positioned as shown in the illustration.

  4. INSTALL REAR COIL SPRING UPPER INSULATOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR COIL SPRING LOWER INSULATOR RH

  6. INSTALL REAR COIL SPRING RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

    Click here

  8. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY RH

    Click here

  9. CONNECT SKID CONTROL SENSOR WIRE (for LH Side)

    Click here

  10. CONNECT SKID CONTROL SENSOR WIRE (for RH Side)

    Click here

  11. INSTALL REAR WHEELS

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  12. STABILIZE SUSPENSION


    1. Lower the vehicle.

    2. Bounce the vehicle up and down several times to stabilize the suspension.

  13. TIGHTEN REAR AXLE BEAM ASSEMBLY

    Click here

  14. TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH

    Click here

  15. TIGHTEN REAR SHOCK ABSORBER ASSEMBLY RH

    Click here

  16. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ HID Headlight)

    Click here

  17. INSTALL REAR FLOOR SIDE MEMBER BRACE SUB-ASSEMBLY

    Click here

  18. INSTALL REAR FLOOR SIDE MEMBER COVER LH

    Click here

  19. INSTALL REAR FLOOR SIDE MEMBER COVER RH

    Click here

  20. INSPECT REAR WHEEL ALIGNMENT


    1. Inspect the rear wheel alignment Click here.

  21. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  22. INSPECT SPEED SENSOR SIGNAL

    Click here

  23. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL (w/ HID Headlight)


    1. Initialize the height control sensor signal Click here.

  24. INSPECT AND ADJUST HEADLIGHT AIMING (w/ HID Headlight)


    1. Inspect and adjust the headlight aiming Click here.