INPUT SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING


    1. A002PY6

      Using a snap ring expander, remove the input shaft rear bearing shaft snap ring from the input shaft.

  2. REMOVE INPUT SHAFT REAR RADIAL BALL BEARING


    1. A002QNKE01

      Using SST, remove the input shaft rear radial ball bearing from the input shaft.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011 )
      09631-20031

  3. REMOVE 6TH DRIVE GEAR


    1. A002NYZE01

      Using SST and a press, press out the 6th drive gear from the input shaft.

      SST
      09950-00020

  4. REMOVE 3RD DRIVE GEAR


    1. A002OELE01

      Using SST and a press, press out the 3rd drive gear from the input shaft.

      SST
      09950-00020
    2. A002PNC

      Remove the spacer from the input shaft.

  5. REMOVE 4TH DRIVE GEAR


    1. A002LISE01

      Using SST and a press, press out the 4th drive gear from the input shaft.

      SST
      09950-00020

  6. REMOVE INPUT SHAFT SNAP RING


    1. A002LU7

      Using 2 screwdrivers and a hammer, tap out the snap ring from the input shaft.

  7. REMOVE INPUT SHAFT FRONT BEARING


    1. A002M7OE01

      Using SST and a press, remove the front bearing from the input shaft.

      SST
      09950-00020