CLUTCH PEDAL SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH START SWITCH ASSEMBLY

    A002OYYE02
    *1 for LHD:
    *2 for RHD:

    1. Install the clutch start switch assembly with the nut.

      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

    2. Connect the clutch start switch assembly connector.

    3. A002N7ZE01
      *1 for LHD:
      *2 Fully depress
      *3 for RHD:

      With the clutch pedal fully depressed, check the clearance between the pedal and switch body.

      Standard Clearance
      Item Specified Condition
      for LHD 1.7 to 4.7 mm (0.0669 to 0.185 in.)
      for RHD 2.7 to 5.7 mm (0.106 to 0.224 in.)

  2. INSPECT CLUTCH START SWITCH ASSEMBLY

    Click here