CLUTCH PEDAL(for RHD) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH PEDAL TURNOVER BUSH

    A002OZY

    1. Install the clutch pedal turnover bush to the clutch pedal sub-assembly.

    2. Apply MP grease to the inside of the clutch pedal turnover bush.

      Text in Illustration
      A002OPC MP grease

  2. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSHING

    A002N43

    1. Apply MP grease to the inside of a new clutch master cylinder push rod clevis bushing.

      Text in Illustration
      A002OPC MP grease

    2. Install the clutch master cylinder push rod clevis bushing to the clutch pedal sub-assembly.

      Tech Tips

      Install the clutch master cylinder push rod clevis bushing from the left side of the vehicle.

  3. INSTALL NO. 1 CLUTCH PEDAL CUSHION


    1. A002NBR

      Install the 2 No. 1 clutch pedal cushions to the clutch pedal sub-assembly.

  4. INSTALL CLUTCH PEDAL BUSHING

    A002M07

    1. Apply MP grease to both sides of 2 new clutch pedal bushings.

      Text in Illustration
      A002OPC MP grease

    2. Install the 2 clutch pedal bushings and collar to the clutch pedal sub-assembly.

  5. INSTALL CLUTCH PEDAL PAD


    1. Install the clutch pedal pad to the clutch pedal sub-assembly.

  6. INSTALL CLUTCH PEDAL SUB-ASSEMBLY


    1. A002PZ6

      Install the clutch pedal sub-assembly to the clutch pedal support sub-assembly with the bolt and nut.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Install the bolt from the left side of the vehicle.

  7. INSTALL PEDAL SPRING HOOK (for Diesel)

    A002M8Z

    1. Apply MP grease to the contact surface of the pedal spring hook.

      Text in Illustration
      A002OPC MP grease

    2. Install the pedal spring hook.

  8. INSTALL PEDAL WITH HOOK SPRING (for Diesel)

    A002NMH

    1. Apply MP grease to the contact surface of the hook spring.

      Text in Illustration
      A002ODU MP grease

    2. Install the hook spring.

  9. INSTALL CLUTCH PEDAL STOPPER BOLT


    1. A002NH4

      Install the clutch pedal stopper bolt together with the nut so that its end touches the No. 1 clutch pedal cushion.

      Tech Tips

      Tighten the lock nut to the specified torque when adjusting the clutch pedal.

  10. INSTALL CLUTCH PEDAL SPRING HOLDER

    A002ORT

    1. Apply MP grease to the contact surface of the clutch pedal spring holder.

      Text in Illustration
      A002OPC MP grease

    2. Install the clutch pedal spring holder to the clutch pedal support sub-assembly.

  11. INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING

    A002OS3

    1. Apply MP grease to the contact surfaces of the clutch pedal spring holder and turn over seat compression spring.

      Text in Illustration
      A002OPC MP grease

    2. Install the turn over seat compression spring to the clutch pedal and clutch pedal spring holder.

  12. INSTALL CENTER OVER SPRING CAP

    A002M4Z

    1. Install the center over spring cap to the clutch pedal sub-assembly.

      Tech Tips

      Install the center over spring cap from the right side of the vehicle.

  13. INSTALL CLUTCH START SWITCH ASSEMBLY

    A002OD5

    1. Install the clutch start switch assembly with the nut.

      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

  14. INSTALL CLUTCH SWITCH ASSEMBLY

    Click here

  15. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY


    1. A002OE5

      Install the clutch pedal support sub-assembly with the 2 nuts and 2 bolts.

      Torque:
      for bolt
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }
      for nut
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }

    2. Connect the clutch start switch assembly connector and clutch switch assembly connector.

  16. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN

    A002LQSE01
    Text in Illustration
    *A for Gasoline
    *B for Diesel
    A002OPC MP grease

    1. Apply MP grease to the contact surface of the clutch master cylinder push rod clevis with hole pin.

    2. Connect the clevis to the clutch pedal sub-assembly with the clutch master cylinder push rod clevis with hole pin.

      Tech Tips

      Install the clutch master cylinder push rod clevis with hole pin from the left side of the vehicle.

    3. Install a new clip to the clutch master cylinder push rod clevis with hole pin.

  17. INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY


    1. Inspect and adjust the clutch pedal sub-assembly Click here.

  18. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Install the lower No. 1 instrument panel airbag assembly Click here.

  19. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Install the instrument panel safety pad sub-assembly Click here.