SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL SHIFT LEVER ASSEMBLY

   
   

   1. 

      Install the shift lever assembly with the 4 nuts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

   
   

   1. 

      Attach the 2 claws and connect the control cable assembly to the shift lever assembly.

      Note

      Make sure that the claws are firmly engaged.

   2. 

      Text in Illustration

      *1	Select Cable
      *2	Shift Cable

      Connect the control shift cable to the shift lever assembly.

   3. Connect the control select cable to the shift lever assembly.

3. ADJUST CONTROL SELECT CABLE

   
   

   1. Adjust the control select cable Click here.

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

5. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

   Click here

6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

   Click here

7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

8. INSTALL SHIFTING HOLE COVER

   Click here

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

10. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)

    Click here

11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    Click here

12. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio)

    Click here

13. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

14. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

15. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

16. INSTALL BOX PANEL SUB-ASSEMBLY

    
    

    1. Install the box panel sub-assembly Click here.