CLUTCH SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT CLUTCH SWITCH ASSEMBLY


    1. A002PD8E47

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 On (pushed) Below 1 Ω
      Off (free) 10 kΩ or higher
      Text in Illustration
      *1 7.65 to 8.35 mm (0.301 to 0.329 in.)

      If the result is not as specified, replace the clutch switch assembly.