IGNITION SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER STEERING COLUMN COVER


    1. A002OH5

      Detach the 4 claws, release the tilt lever and remove the lower steering column cover.

  4. REMOVE IGNITION SWITCH ASSEMBLY


    1. A002O95

      Disconnect the ignition switch connector.

    2. A002LKK

      Remove the 2 screws and ignition switch assembly.