IGNITION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL IGNITION SWITCH ASSEMBLY


    1. A002LKK

      Install the ignition switch with the 2 screws.

    2. A002O95

      Connect the ignition switch connector.

    3. A002MM3

      for CVT:

      Attach the claw to connect the key interlock solenoid wire harness connector to the ignition switch connector.

  2. INSTALL LOWER STEERING COLUMN COVER


    1. A002O9O

      Attach the 4 claws to install the lower steering column cover.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.