IGNITION SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER STEERING COLUMN COVER


    1. A002O9O

      Detach the 4 claws, release the tilt lever and remove the lower steering column cover.

  4. REMOVE IGNITION SWITCH ASSEMBLY


    1. A002MM3

      for CVT:

      Detach the claw and disconnect the key interlock solenoid wire harness connector from the ignition switch connector.

    2. A002O95

      Disconnect the ignition switch connector.

    3. A002LKK

      Remove the 2 screws and ignition switch.