PCV VALVE INSTALLATION

PROCEDURE


  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


    1. A002MWDE31
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the ventilation valve.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent
    2. A002PBE

      Using a 22 mm ball joint lock nut wrench, install the ventilation valve.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where ball joint lock nut wrench is combined with a torque wrench Click here.

  2. INSTALL INTAKE MANIFOLD


    1. Install the intake manifold Click here.