PCV VALVE INSPECTION

PROCEDURE


  1. INSPECT VENTILATION VALVE SUB-ASSEMBLY


    1. A002MKAE02
      *1 Cylinder Head Side
      *2 Clean Hose

      Install a clean hose to the ventilation valve.

    2. Inspect the ventilation valve operation.


      1. Blow air into the cylinder head side and check that air passes through easily.

        CAUTION:

        Do not suck air through the valve. Petroleum substances inside the valve are hazardous to your health.

      2. A002N8QE11
        *1 Intake Manifold Side
        *2 Clean Hose

        Blow air into the intake manifold side and check that air passes through with difficulty.

        If the result is not as specified, replace the ventilation valve.

    3. Remove the clean hose from the ventilation valve.