SHIFT LEVER DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE SHIFT LOCK RELEASE BUTTON COVER


    1. A002OEBE02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, detach the 2 claws and remove the shift lock release button cover from the position indicator housing assembly.

      Note

      Be careful not to damage the shift lock release button cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY

    Click here

  3. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    1. A002NL4

      Disconnect the clamp and indicator light wire connector from the position indicator housing assembly.

    2. Rotate the indicator light wire socket counterclockwise to align the wire socket with the key part of the position indicator housing and remove the wire.

  4. REMOVE POSITION INDICATOR LIGHT BULB


    1. Remove the bulb and cap from the indicator light wire socket.

  5. REMOVE UPPER POSITION INDICATOR HOUSING


    1. A002Q4V

      Detach the 4 claws and remove the upper position indicator housing from the shift lock control unit.

  6. REMOVE LOWER POSITION INDICATOR HOUSING


    1. Detach the 2 claws and remove the lower position indicator housing from the shift lock control unit.

      A002MUR

  7. REMOVE POSITION INDICATOR SLIDE COVER


    1. A002MKW

      Remove the position indicator slide cover together with the No. 2 position indicator slide cover.

    2. Remove the No. 2 position indicator slide cover from the position indicator slide cover.

  8. REMOVE SHIFT LOCK CONTROL ECU


    1. A002PEN

      Disconnect the shift lock solenoid connector from the shift lock control ECU.

    2. Detach the 3 claws and remove the shift lock control ECU from the shift lock control unit.