SHIFT LEVER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A002OIP

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. A002N5LE06
      Text in Illustration
      *1 Stopper
      *2 Nut

      Pull out the stopper of the transmission control cable assembly.

      Note

      Do not remove the stopper. If the stopper is removed, reinstall it to its original position.

    4. Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

  3. REMOVE SHIFT LEVER ASSEMBLY

    A002PS2

    1. Disconnect the 2 connectors.

    2. Detach the 2 clamps and disconnect the wire harness from the shift lever assembly.

    3. Remove the 4 nuts and shift lever assembly.