PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  7. REMOVE BATTERY

  8. REMOVE BATTERY TRAY

  9. DISCONNECT RADIATOR PIPE

    Click here

  10. REMOVE BATTERY CARRIER

    Click here

  11. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A002NFN

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    3. Remove the clip and separate the transmission control cable assembly from the No. 1 transmission control cable bracket.

  12. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A002QW6

      Remove the nut, washer and control shaft lever from the park/neutral position switch assembly.

    2. Disconnect the park/neutral position switch assembly connector.

    3. A002MH3E05
      Text in Illustration
      *1 Lock Plate

      Using a screwdriver, pry out the lock plate and remove the lock nut and lock plate from the park/ neutral position switch assembly.

    4. A002NX0

      Remove the 2 bolts and park/neutral position switch assembly from the continuously variable transaxle assembly.