FRONT DRIVE SHAFT ASSEMBLY(for 1WW) REMOVAL

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY LH

    Click here

  2. REMOVE FRONT AXLE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. DRAIN MANUAL TRANSAXLE OIL

    Click here

  5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH


    1. A002MTGE04

      Using SST, remove the front drive shaft assembly LH.

      SST
      09520-01010
      09520-24010   ( 09520-32040 )

      Note


      • Be careful not to damage the transaxle case oil seal LH, front axle inboard joint boot and front drive shaft dust cover LH.

      • Be careful not to drop the front drive shaft assembly LH.

  6. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH


    1. A002Q0W

      Using a T50 ''TORX'' socket wrench, remove the 2 bolts and pull out the front drive shaft assembly RH.

      Note


      • Be careful not to damage the transaxle case oil seal RH, front axle inboard joint boot and front drive shaft dust cover RH.

      • Be careful not to drop the front drive shaft assembly RH.

  7. REMOVE FRONT DRIVE SHAFT HOLE SNAP RING LH


    1. A002N8B

      Using a screwdriver, remove the front drive shaft hole snap ring LH.

      Note

      Be careful not to damage the spline of the front drive inboard joint LH.