SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

   
   

   1. 

      Connect the 2 connectors.

   2. 

      Install the 2 transmission shift switch assemblies to the steering wheel assembly with the 2 screws.

      Torque:

      0.8 N*m  { 9 kgf*cm, 7 in.*lbf }

   3. 

      Attach the 6 guides to install the No. 1 switch wire.

   4. Connect the connector.

2. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

3. INSTALL STEERING WHEEL ASSEMBLY

   Click here