WASHER NOZZLE(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

2. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE FRONT FENDER MAIN SEAL LH

   Click here

5. REMOVE FRONT FENDER MAIN SEAL RH

   Click here

6. REMOVE FRONT WIPER ARM HEAD CAP

   Click here

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

   Click here

8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

   Click here

9. REMOVE HOOD TO COWL TOP SEAL

   Click here

10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

    Click here

11. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)

    Tech Tips

    Use the same procedure to remove the other washer nozzle.

    
    

    1. 

       Detach the 3 claws and remove the washer nozzle.

    2. Disconnect the hose.

12. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)

    
    

    1. 

       Detach the connector clamp and disconnect the connector.

    2. Disconnect the hose.

    3. 

       Detach the 4 claws and remove the washer nozzle.