WASHER MOTOR(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY

   
   

   1. 

      Install the washer motor together with the gasket in the direction shown in the illustration.

      Tech Tips

      Make sure the gasket is positioned as shown in the illustration.

   2. Connect the connector.

2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY

   Click here

3. INSTALL WASHER INLET SUB-ASSEMBLY

   Click here

4. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here

5. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

   Click here

6. INSTALL FRONT FENDER LINER LH

   Click here

7. INSTALL SIDE STEP ASSEMBLY

   Click here

8. INSTALL FRONT FENDER MUDGUARD LH

   Click here

9. INSTALL HEIGHT CONTROL PROTECTOR PIPE

   Click here

10. INSTALL FRONT WHEEL LH

    Torque:

    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }