WASHER MOTOR(for Rear Side) REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL LH

2. REMOVE HEIGHT CONTROL PROTECTOR PIPE

   Click here

3. REMOVE FRONT FENDER MUDGUARD LH

   Click here

4. REMOVE SIDE STEP ASSEMBLY

   Click here

5. REMOVE FRONT FENDER LINER LH

   Click here

6. DRAIN WASHER FLUID

   Click here

7. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

8. REMOVE WASHER INLET SUB-ASSEMBLY

   Click here

9. REMOVE WINDSHIELD WASHER JAR ASSEMBLY

   Click here

10. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY

    
    

    1. Disconnect the connector.

    2. 

       Remove the washer motor together with the gasket in the direction shown in the illustration.