WASHER MOTOR(for Front Side) INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B001A4S

      Install the washer motor together with the gasket in the direction shown in the illustration.

      Tech Tips

      Make sure the gasket is positioned as shown in the illustration.

    2. Connect the connector.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. B001ATWE03

      Temporarily install the windshield washer jar with the 4 bolts.

    2. Tighten the 4 bolts in the order shown in the illustration to install the windshield washer jar.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the 2 washer hoses.

    4. w/o Headlight Cleaner System:


      1. Connect the connector.

      2. Attach the 2 clamps.

    5. w/ Headlight Cleaner System:


      1. Connect the 2 connectors.

      2. Attach the 2 clamps.

      3. Connect the headlight cleaner hose to the headlight cleaner motor and pump.

  3. INSTALL WASHER INLET SUB-ASSEMBLY


    1. B0018ZR

      Install the washer inlet with the clip.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. B00185W

      Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  6. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 12 clips and 2 new grommets.

    2. Using a T30 "TORX" socket, install the 2 screws.

    3. Install the 2 screws.

  7. INSTALL SIDE STEP ASSEMBLY

    Click here

  8. INSTALL FRONT FENDER MUDGUARD LH

    Click here

  9. INSTALL HEIGHT CONTROL PROTECTOR PIPE

    Click here

  10. INSTALL FRONT WHEEL LH

    Torque:
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }