REAR WIPER RUBBER REMOVAL

PROCEDURE


  1. REMOVE REAR WIPER BLADE


    1. A01WS80E01
      *a Claw

      Raise the rear wiper blade to the position shown in the illustration until the meshing of the claw disengages with a clicking sound.

      Note

      Be careful not to break the claw.

    2. Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.

      Note

      Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.

  2. REMOVE REAR WIPER RUBBER


    1. A01WRB3E08
      *1 Push
      *2 Pull
      *3 Stopper

      Pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration and remove it.

      Note

      Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged.

      Tech Tips

      Pushing the rubber as shown in the illustration will allow it to be removed more easily.

    2. Remove the 2 wiper rubber backing plates from the wiper rubber.