OUTER MIRROR SWITCH INSPECTION

PROCEDURE


  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (OUTER MIRROR SWITCH)


    1. Check that the LED illuminates.


      1. A01WRBPE03
        Text in Illustration
        *a

        Component without harness connected

        (Multiplex Network Master Switch Assembly (Outer Mirror Switch))

        Apply battery voltage to the master switch and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3 (ILL+)

        Battery negative (-) → 13 (ILL-)

        		 LED illuminates

        • If the result is not as specified, replace the multiplex network master switch assembly (outer mirror switch).