POWER BACK DOOR DRIVE UNIT INSTALLATION

PROCEDURE


  1. INSTALL POWER BACK DOOR ROD


    1. When reusing the back door stay assembly LH:


      1. Install the stop ring to the power back door rod.

    2. Attach the ball joint to install the power back door rod to the power back door unit assembly.

  2. INSTALL POWER BACK DOOR UNIT ASSEMBLY


    1. A01WPIN

      Attach the 2 guides to install the power back door unit assembly.

      Text in Illustration
      B0018FC Bolt
      B00199O Connector

    2. Install the 4 bolts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

    3. Connect the connector.

  3. INSTALL REAR UPPER PILLAR GARNISH RH

    Click here

  4. CONNECT POWER BACK DOOR ROD

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  6. INSTALL CENTER BACK DOOR GARNISH

    Click here

  7. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  10. INSTALL REAR STEP COVER

    Click here

  11. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

    Tech Tips

    Use the same procedure described for the LH side.