POWER BACK DOOR CLOSER SWITCH INSPECTION

PROCEDURE


  1. INSPECT DOOR CONTROL SWITCH

    A01WTURE02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 - 4 Pushed (on) Below 1 Ω
      3 - 4 Not pushed (off) 10 kΩ or higher
      Text in Illustration
      *1

      Component without harness connected

      (Door Control Switch)

      If the result is not as specified, replace the door control switch.