POWER BACK DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR CONTROL SWITCH

    A01WVMTE02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 (CSW) - 3 (E) Power back door control switch is pushed (on) Below 1 Ω
      6 (CSW) - 3 (E) Power back door control switch is not pushed (off) 10 kΩ or higher
      Text in Illustration
      *a

      Component without harness connected

      (Back Door Control Switch)
      *b Not pushed
      *c Pushed

      If the result is not as specified, replace the back door control switch.