POWER BACK DOOR MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER BACK DOOR MAIN SWITCH

    A01WVG3E05

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 (MSE) - 9 (MSW) Not pushed (on) Below 1 Ω
      6 (MSE) - 9 (MSW) Pushed (off) 10 kΩ or higher
      Text in Illustration
      *a

      Component without harness connected

      (Power Back Door Main Switch)
      *b Not pushed
      *c Pushed

      If the result is not as specified, replace the power back door main switch.