BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. B00189LC05
      *a Open Switch
      *b Lock Switch
      *c Pushed
      *d Not pushed
      *e

      Component without harness connected

      (Back Door Opener Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (E) - 1 (L) Lock switch pushed Below 1 Ω

      2 (E) - 1 (L)

      3 (UL) - 2 (E)

      		 Lock switch and open switch not pushed 10 kΩ or higher
      3 (UL) - 2 (E) Open switch pushed Below 1 Ω

      Tech Tips

      If the result is not as specified, replace the back door opener switch assembly.