BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. A01WPLOE13
      Text in Illustration
      *a

      Component without harness connected

      (Back Door Opener Switch)
      *b Pushed
      *c Not pushed
      *d Lock Switch
      *e Open Switch

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (UL) - 2 (L) Lock switch pushed Below 1 Ω

      1 (UL) - 2 (L)

      3 (B) - 2 (L)

      		 Lock switch and open switch not pushed 10 kΩ or higher
      3 (B) - 2 (L) Open switch pushed Below 1 Ω

      • If the result is not as specified, replace the back door opener switch assembly.