OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

    A01WSR6

    1. Attach the claw to install the mirror.

    2. Install the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    3. Attach the clamp.

    4. Connect the connector.

  2. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH

    Click here

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION

    Click here

  5. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  6. INSTALL FRONT UPPER ARMREST BASE PANEL

    Click here

  7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  8. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH

    Click here