CUSTOMIZING FUNCTION WITH GTS
Tech Tips
The following item can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Utility / Customize Setting / PSD&PBD operation.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
|---|---|---|---|
| PBD SW Operation | 0.8s | Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 seconds. | 0.8s or ON |
| PBD Buzzer | ON | Function that makes the power back door buzzer sound when power back door is operating | ON or OFF |
| Door Unlock with 1 Motion.*1 | ALL DOORS*2 Back Door*3 |
Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pushed to operate the power back door. | Back Door or ALL DOORS |
| Wireless Power Back Door Open*4 | Lock:OFF/Unlock:0.8s | Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). | Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8 |
Tech Tips
*1: "ALL DOORS" is only available for vehicles with the wireless one motion function.
*2: w/ Telematics Transceiver
*3: w/o Telematics Transceiver
*4: "Lock:Twice/Unlock:Twice" and "Lock:0.8s/Unlock:0.8s" are only available for vehicles with the wireless one motion function.