REAR POWER WINDOW SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01WQ3CE12
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition

      2 (UP) - 5 (GND)

      2 (UP) - 4 (AUTO)

      		 Auto up operation Below 1 Ω
      2 (UP) - 5 (GND) Manual up operation Below 1 Ω
      5 (GND) - 10 (DOWN) Manual down operation Below 1 Ω

      5 (GND) - 10 (DOWN)

      4 (AUTO) - 10 (DOWN)

      		 Auto down operation Below 1 Ω

      • If the result is not as specified, replace the rear power window regulator switch assembly.