ROOF HEADLINING DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 AIR OUTLET GRILLE ASSEMBLY

    Tech Tips

    Use the same procedure for both No. 2 air outlet grille assemblies.


    1. B0018OZ

      Detach 6 claws and remove the No. 2 air outlet grille assembly.

  2. REMOVE NO. 1 AIR OUTLET GRILLE ASSEMBLY

    Tech Tips

    Use the same procedures described for the No. 2 air outlet grille assembly.

  3. REMOVE NO. 1 ROOF SILENCER PAD

    B0018C3

    1. Remove the No. 1 roof silencer pad.

  4. REMOVE NO. 4 ROOF SILENCER PAD

    B0019C4

    1. Remove the No. 4 roof silencer pad.

  5. REMOVE NO. 1 ROOF WIRE


    1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

    2. Remove the 6 pieces of tape from the roof headlining.

    3. Detach each clamp, and remove the No. 1 roof wire and washer hose.

    4. Remove the double-sided tape remaining on the headlining.

      B001A1CE01
      Text in Illustration
      *a Visor Connector - -
      B0019VB Tape - -

  6. REMOVE ANTENNA CORD SUB-ASSEMBLY

    Click here