FRONT CONSOLE BOX(w/o Cool Box) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    A01WUA3E01

    1. Put protective tape around the lower instrument panel pad sub-assembly LH.

      Text in Illustration
      *a Protective Tape
    2. A01WTGF

      Detach the 5 claws and 2 clips.

    3. Disconnect the connector and remove the lower instrument panel pad sub-assembly LH.

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A01WTJ9E01

    1. Put protective tape around the lower instrument panel pad sub-assembly RH.

      Text in Illustration
      *a Protective Tape
    2. A01WS5G

      Detach the 15 claws and remove the lower instrument panel pad sub-assembly RH.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A01WTI6

    1. Detach the 2 claws and disconnect the shifting hole cover.

    2. A01WVID

      Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

  4. REMOVE UPPER CONSOLE BOX

    A01WRQ1E01

    1. Put protective tape around the upper console box.

      Text in Illustration
      *a Protective Tape
    2. A01WSFW

      Using a moulding remover A, detach the 4 clips and remove the upper console box.

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01WTRSE01

    1. Put protective tape around the instrument panel finish panel end LH.

      Text in Illustration
      *a Protective Tape
    2. A01WVDV

      Detach the 2 clips and 7 guides and remove the instrument panel finish panel end LH.

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01WRAJE01

    1. Put protective tape around the instrument panel finish panel end RH.

      Text in Illustration
      *a Protective Tape
    2. A01WPFE

      Detach the 2 clips and 7 guides and remove the instrument panel finish panel end RH.

  7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A01WTJ4E01

    1. Put protective tape around the lower center instrument cluster finish panel sub-assembly.

      Text in Illustration
      *a Protective Tape
    2. A01WTUC

      Using a moulding remover A, detach the 2 claws and 2 clips and remove the lower center instrument cluster finish panel sub-assembly.

  8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    A01WUMCE01

    1. Put protective tape around the upper console panel sub-assembly.

      Text in Illustration
      *a Protective Tape
    2. A01WQG8

      Detach the 6 claws and 2 guides.

    3. Disconnect the connectors and remove the upper console panel sub-assembly.

  9. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A01WTZWE01

    1. Put protective tape around the rear console end panel sub-assembly.

      Text in Illustration
      *a Protective Tape
    2. A01WUP2

      Using a moulding remover B, detach the 6 claws.

    3. Disconnect the connectors and remove the rear console end panel sub-assembly.

  10. REMOVE TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)

    Click here

  11. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY


    1. Remove the 4 bolts and 2 screws.

    2. Detach the 2 claws and remove the rear console box sub-assembly.

      A01WW2ZE01
      Text in Illustration
      *a Screw *b Bolt