INSTRUMENT PANEL SAFETY PAD REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL GLOVE COMPARTMENT DOOR LOCK PIN

    A01WR13

    1. Install the glove compartment door lock pin.

  2. INSTALL GLOVE COMPARTMENT DOOR LOCK COVER

    A01WWIJ

    1. Attach the 3 claws to install the glove compartment door lock cover.

  3. INSTALL GLOVE COMPARTMENT DOOR LOCK ASSEMBLY

    A01WRFW

    1. Install the glove compartment door lock assembly with the 2 screws.

  4. INSTALL CONSOLE COMPARTMENT DOOR CUSHION

    Tech Tips

    Use the same procedure for both console compartment door cushions.


    1. A01WVM4

      Install the console compartment door cushion.

  5. INSTALL LOWER INSTRUMENT COVER LH

    A01WVP5

    1. Attach the 3 guides.

    2. Attach the 2 claws to install the lower instrument cover LH.

  6. INSTALL GLOVE COMPARTMENT PLATE

    A01WUMK

    1. Attach the 2 claws to install the glove compartment plate.

  7. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

    A01WWP3

    1. Attach the 2 claws to install the glove compartment door sub-assembly.

    2. Install the 2 screws.

  8. INSTALL GLOVE BOX LIGHT ASSEMBLY

    Click here

  9. INSTALL NO. 2 SWITCH HOLE BASE

    A01WTLK

    1. Attach the 4 claws to install the No. 2 switch hole base.

  10. INSTALL METER HOOD SPACER

    A01WPDB

    1. Attach the 8 claws to install the meter hood spacer.

  11. INSTALL INSTRUMENT PANEL HOLE COVER RETAINER

    A01WWCR

    1. Install the instrument panel hole cover retainer with the 2 screws.

  12. INSTALL MAIN SWITCH ASSEMBLY

    Click here

  13. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01WWXI

    1. Attach the 4 claws to install the No. 4 instrument panel register assembly.

    2. Connect the connector and attach the clamps.

  14. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01WQN0

    1. Attach the 4 claws to install the No. 3 instrument panel register assembly.

    2. Connect the connector.

  15. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01WULG

    1. Attach the 4 claws to install the No. 2 instrument panel register assembly.

    2. Connect the connector and attach the clamps.

  16. INSTALL NAVIGATION ANTENNA ASSEMBLY

    Click here

  17. INSTALL ANTENNA CORD SUB-ASSEMBLY


    1. Attach the clamps to install the antenna cord sub-assembly.

      A01WR59

  18. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. Attach the the clamps to install the No. 2 instrument panel wire.

      A01WQYC

  19. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

    Click here

  20. INSTALL NO. 2 INSTRUMENT PANEL WIRE (PASSENGER AIRBAG)

    Click here

  21. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Attach the 9 guides, 7 claws and 5 clips to install the defroster nozzle assembly.

      A01WQXK

  22. INSTALL NO. 1 SIDE DEFROSTER NOZZLE

    A01WWCD

    1. Attach the 2 claws to install the No. 1 side defroster nozzle.

  23. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

    A01WUL8

    1. Attach the 2 claws to install the No. 2 side defroster nozzle.

  24. INSTALL REAR NO. 1 AIR DUCT

    A01WVAW

    1. Install the rear No. 1 air duct with the 2 screws.