AIR CONDITIONING PANEL INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. Insert the multi-media module receiver assembly and attach the 6 claws on its backside.

      Note

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

    3. B0018HV

      Install the multi-media module receiver assembly with the 2 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL INSTRUMENT PANEL MOULDING SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  6. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here