VISCOUS HEATER MAGNET CLUTCH(w/ Viscous Heater) INSTALLATION

PROCEDURE


  1. INSTALL IDLER PULLEY BRACKET (w/ Belt Tension Side)

    B001AH4

    1. Install the bracket with the 3 bolts.

      Torque:
      48.5 N*m  { 495 kgf*cm, 36 ft.*lbf }

  2. INSTALL IDLER PULLEY BRACKET

    B0018W7

    1. Install the bracket with the bolt.

      Torque:
      48.5 N*m  { 495 kgf*cm, 36 ft.*lbf }

  3. INSTALL VISCOUS WITH MAGNET CLUTCH HEATER ASSEMBLY

    B001A22

    1. Install the heater assembly with the 2 bolts.

      Torque:
      48.5 N*m  { 495 kgf*cm, 36 ft.*lbf }

    2. Connect the 2 heater hoses.

    3. Using pliers, grip the claws of the clips and slide the 2 clips.

    4. Connect the connector and attach the clamp.

  4. INSTALL IDLER PULLEY ASSEMBLY

    B0019TV

    1. Install the 2 idler pulleys with the 2 bolts.

      Torque:
      48.5 N*m  { 495 kgf*cm, 36 ft.*lbf }

  5. INSTALL RADIATOR ASSEMBLY

    Click here

  6. INSTALL RADIATOR RESERVE TANK ASSEMBLY

    Click here

  7. INSTALL FAN SHROUD WITH FAN

    Click here

  8. INSTALL OIL COOLER HOSE

    Click here

  9. INSTALL NO. 2 RADIATOR HOSE

  10. INSTALL NO. 1 RADIATOR HOSE

  11. INSTALL VANE PUMP ASSEMBLY

    Click here

  12. INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY

    Click here

  13. INSTALL V-RIBBED BELT

    Click here

  14. INSTALL INTAKE AIR CONNECTOR

    Click here

  15. TEMPORARILY INSTALL NO. 1 AIR CLEANER HOSE

    Click here

  16. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  17. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  18. INSTALL NO. 3 ENGINE ROOM WIRE

    Click here

  19. ADD ENGINE COOLANT

    Click here

  20. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  21. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  22. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  24. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  25. CHECK FOR ENGINE COOLANT LEAKS

    Click here