DUCT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL DUCT TEMPERATURE SENSOR

   
   

   1. Attach the 4 claws to install the 2 sensors.

      

2. INSTALL REAR NO. 6 AIR DUCT

   
   

   1. Install the duct with the 5 screws.

   2. Connect the 2 connectors.

      

3. INSTALL FRONT FLOOR CARPET ASSEMBLY

   
   

   1. Install the floor carpet.

   2. Install the 2 clips.

4. INSTALL REAR NO. 1 SEAT PROTECTOR

   Click here

5. INSTALL REAR NO. 2 SEAT PROTECTOR

   Click here

6. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

   Click here

7. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Click here

8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

9. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

10. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

11. INSTALL REAR STEP COVER

    Click here

12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here

13. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

    Click here

14. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    Click here

15. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

17. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

18. CHECK SRS WARNING LIGHT

    Click here