COMPRESSOR(for 1VD-FTV) INSPECTION

PROCEDURE

1. INSPECT MAGNET CLUTCH ASSEMBLY

   

   Text in Illustration

   *1	Magnet Clutch Rotor
   *2	Magnet Clutch Hub
   *a	Component without harness connected Magnet Clutch Assembly

   
   

   1. Check the magnet clutch operation.

      
      

      1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

         If the operation is not as specified, replace the magnet clutch assembly.

   2. Measure the resistance between terminals 1 and 2.

      Standard resistance
      65 to 125 Ω at 20°C (68°F)
      If the resistance is not as specified, replace the cooler compressor assembly.