COMPRESSOR(for 1VD-FTV) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE RADIATOR ASSEMBLY

    Click here

  4. REMOVE INTERCOOLER ASSEMBLY

    Click here

  5. REMOVE FRONT WHEEL LH

  6. REMOVE FRONT FENDER APRON SEAL FRONT LH

    Click here

  7. REMOVE NO. 2 AIR HOSE

    Click here

  8. REMOVE NO. 4 AIR TUBE

    Click here

  9. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY

    Click here

  10. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B0018UJ

      Remove the bolt and disconnect the discharge hose from the cooler compressor.

    2. Remove the O-ring from the discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  11. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. B0018RQ

      Remove the bolt and disconnect the suction hose from the cooler compressor.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  12. REMOVE COOLER COMPRESSOR ASSEMBLY


    1. B001AL5

      Disconnect the connector.

    2. Remove the 4 bolts.

    3. B0019BQ

      Remove the cooler compressor as shown in the illustration.