REAR BLOWER MOTOR INSPECTION

PROCEDURE


  1. INSPECT BLOWER WITH FAN (REAR) MOTOR SUB-ASSEMBLY

    A01WQRDE03
    Text in Illustration
    *a

    Component without harness connected

    Blower with Fan (rear) Motor Sub-assembly

    1. Apply battery voltage and check the operation of the motor, as shown in the table.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 Motor operates smoothly

      If the result is not as specified, replace the blower with fan (rear) motor sub-assembly.