AIR CONDITIONING SYSTEM Cooling Box Blower Motor Circuit

DESCRIPTION

The cooler blower motor is operated by signals from the air conditioning amplifier assembly (for cool box).

WIRING DIAGRAM

A01WQ3NE09

CAUTION / NOTICE / HINT

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY - BATTERY)


    1. A01WR9BE02
      Text in Illustration
      *a

      Front view of wire harness connector

      (to No. 1 Cooler Wiring Harness Sub-assembly)

      Disconnect the No. 1 cooler wiring harness sub-assembly connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      1 - Body ground Engine switch off Below 1 V
      Engine switch on (IG) 11 to 14 V

    NG
    OK
  2. CHECK HARNESS AND CONNECTOR (NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY - BODY GROUND)


    1. A01WR9BE02
      Text in Illustration
      *a

      Front view of wire harness connector

      (to No. 1 Cooler Wiring Harness Sub-assembly)

      Disconnect the No. 1 cooler wiring harness sub-assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 - Body ground Always Below 1 Ω

    NG
    OK
  3. CHECK NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY


    1. Replace the No. 1 cooler wiring harness sub-assembly with a normal one and check that the condition returns to normal.

      OK
      Same problem does not occur.

    OK
    NG
  4. INSPECT COOL BOX BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. Remove the cool box blower with fan motor sub-assembly Click here.

    2. Inspect the cool box blower with fan motor sub-assembly Click here.

      OK
      Cooler blower motor operates smoothly.

    OK
    NG