AIR CONDITIONING SYSTEM SYSTEM DESCRIPTION


  1. GENERAL


    1. The air conditioning system has the following features:


      • The 4-ZONE air conditioner system controls the temperature for the front and rear seats independently. In addition, it uses the amount of sunlight and temperature at each seat to adjust the temperature and airflow volume. When the 4-ZONE switch is on, the temperature, airflow mode and airflow volume at each of the 4 seats (driver, front passenger, rear left and rear right) are automatically adjusted.

      • In accordance with the temperature set using the temperature control switch, the air conditioning amplifier assembly determines the outlet air temperature based on the input signals from various sensors. In addition, corrections are made in accordance with the signals from the water temperature sensor to control the outlet air temperature.

      • Controls the blower motor in accordance with the airflow volume determined by the air conditioning amplifier assembly based on the input signals from various sensors.

      • Automatically changes the dampers in accordance with the outlet mode ratio that is determined by the air conditioning amplifier assembly based on the input signals from various sensors.

      • Based on the signals from the ambient temperature sensor, this system calculates the outside temperature and indicates it in the multi-information display in the combination meter.

      • The Positive Temperature Coefficient (PTC) heater system contains a PTC heater that heats the air that has passed through the heater core to ensure proper heater performance.

      • A compact, lightweight, and highly efficient straight flow (full-path flow) aluminum heater core is used.

      • The micro dust and pollen filter control is used to remove pollen in the air around the upper areas of the driver and front passenger seats.

      • The air conditioning amplifier assembly is equipped with a self diagnosis function. If there is a malfunction in the system, it stores the DTCs (Diagnostic Trouble Codes) in its memory.

  2. MODE POSITION AND DAMPER OPERATION

    A01WSUGE11
    Function of Main Damper
    Control Damper Operation Position Damper Position Operation
    Air Inlet Control Damper Fresh A Brings in fresh air.
    Recirculation B Recirculates internal air.
    Air Mix Control Damper Max Cool to Max Hot K, L, M Varies the mixture ratio of cold air and hot air in order to regulate the temperature continuously from hot to cool.
    Cool Air Bypass Control Damper Max Cool to Max Hot H, I, J Cool air blows out from the front center register and side registers in order to adjust the temperature around the heads of the occupants during cooling or warming.
    Mode Control Damper A01WRBV

    Def

    		 C Defrosts the windshield through the center defroster and side defroster.
    A01WV5P

    Foot/Def

    		 D

    Defrosts the windshield through the center and side defrosters while air is also blown out from the front and rear footwell register ducts.

    In addition, air blows out slightly from the front and rear center registers and side registers.
    A01WPWV

    Foot

    		 E

    Air blows out of the front and rear footwell register ducts, front and rear center registers and side registers.

    In addition, air blows out slightly from the center and side defrosters.
    A01WPQ6

    Bi-level

    		 F

    Air blows out of the front center registers, side registers, and rear center registers.

    Air also blows out from the front and rear footwell register ducts.
    A01WQ1K

    Face

    		 G Air blows out of the front center registers, side registers, and rear center registers.
    A01WSN9E07
    Function of Main Damper
    Control Damper Operation Position Damper Position Operation
    Mode Control Damper A01WQ1K

    Face

    		 A Air blows out of the rear roof side register duct.
    A01WPQ6

    Bi-level

    		 B Air blows out of the rear roof side register duct and rear footwell register duct.
    A01WPWV

    Foot

    		 C Air blows out of the rear footwell register duct.
    Air Mix Control Damper Max Cool to Max Hot D, E Varies the mixture ratio of cold air and hot air in order to regulate the temperature continuously from hot to cool.

  3. AIR OUTLETS AND AIRFLOW VOLUME

    A01WT00E04
    *1 Front Air Conditioning System:
    Air Outlet Mode Selectable Mode Register (Face) Register (Foot) Defroster
    Automatic Manual Center Side Rear Center Front Rear
    A B C D E F
    A01WQ1K FACE-U*1 ○ ○ A01WRW6 A01WRW6 A01WUI4 - - -
    FACE-L*2, *6 ○ - A01WRW6 A01WRW6 A01WUI4 A01WVYV - -
    A01WPQ6 B/L-U*1 ○ ○ A01WUI4 A01WUI4 A01WRTS A01WRTS A01WVYV -
    B/L-L*2 ○ - A01WUI4 A01WUI4 A01WRTS A01WUI4 A01WRTS -
    A01WPWV FOOT F*3 ○ - A01WRTS A01WRTS A01WPJ1 A01WU3P A01WRTS A01WVYV
    FOOT R*4 ○ ○ A01WRTS A01WRTS A01WPJ1 A01WRW6 A01WRW6 A01WVYV
    FOOT D*5 ○ - A01WRTS A01WRTS A01WPJ1 A01WRW6 A01WRTS A01WRTS
    A01WV5P F/D ○ ○ A01WRTS A01WRTS A01WPJ1 A01WUI4 A01WRTS A01WRW6
    A01WRBV DEF ○ ○ - - - - - A01WU3P

    Tech Tips


    • The size of the circle indicates the proportion of airflow volume.

    • *1: Greater airflow volume at the upper area.

    • *2: Greater airflow volume at the lower area.

    • *3: Greater airflow volume at the front.

    • *4: Greater airflow volume at the rear foot area.

    • *5: Greater airflow volume at the defroster.

    • *6: In contrast to FACE-U, a small amount of air comes out of the front footwell register duct.

    A01WVQ4E04
    Rear Air Conditioning System
    *1 Inlet
    Air Outlet Mode Register Duct
    Roof Rear Foot 1 Rear Side 2 Rear Foot 2 C Pillar
    A B C D E
    A01WQ1K FACE A01WUI4 - - - -
    A01WPQ6 BI-LEVEL A01WRTS A01WPJ1 A01WPJ1 A01WVYV A01WVYV
    A01WPWV FOOT - A01WVYV A01WVYV A01WRTS A01WRTS

    Tech Tips

    The size of the circle indicates the proportion of airflow volume.