REAR CENTER SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY

    A01WVAME03
    *1 Protruding Part

    1. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      The anchor part of the seat belt must not overlap the protruding part.

  2. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    Click here

  3. INSTALL REAR NO. 1 SEAT ASSEMBLY LH


    1. Install the rear No. 1 seat assembly Click here.