REAR NO. 2 SEAT OUTER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. Remove the rear No. 2 seat assembly Click here.

  2. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  3. REMOVE REAR STEP COVER

    Click here

  4. REMOVE REAR DOOR SCUFF PLATE

    Click here

  5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY

    B00192K
    B00190O

    Tech Tips

    When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Detach the 3 claws and remove the cover.

    2. B0019R5

      Remove the bolt and disconnect the rear seat outer belt floor anchor.

    3. B001AD7

      for LH Side:


      1. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor LH.

    4. B001APB

      for RH Side:


      1. Detach the 3 claws and remove the cover.

      2. B0018NQ

        Remove the bolt and disconnect the rear seat outer belt floor anchor RH.

    5. w/ Manual Folding-up Function:


      1. Remove the screw, clip and bolt.

      2. Detach the 19 clips and 2 claws.

        B001A0J

      3. Disconnect the thermistor connector, power outlet socket connector and rear seat lock control lever cable, and then remove the quarter trim panel.

    6. w/ Automatic Folding-up Function:


      1. Remove the screw and clip.

      2. Detach the 19 clips and 2 claws.

        B0018RJ

      3. Disconnect the thermistor connector and power outlet socket connector, and then remove the quarter trim panel.

  6. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY


    1. A01WQTYE04
      *1 Protective Tape

      Remove the bolt and disconnect the seat belt shoulder anchor.


      1. Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

      2. B00189W

        Remove the bolt and seat belt shoulder anchor.

    2. A01WPHK

      Remove the bolt and rear No. 2 seat outer belt.