REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly Click here.

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    B0019RZ

    1. Remove the bolt and belt.